Printer Friendly

Wainscot Panels, Selecting A Repair-wood-wainscoting

Help Pages: | Faq | Finishing | General-care-of-hardwood-wains | Glossary | Height | Installation-of-beadboard | Installation-of-panels | Landing | Length | Material | Panel-Size | Repair-wood-wainscoting | Ships-in | Style | Type | Upgrade |

Repair
If your Wood Wainscoting is damaged during handling and installation, there are a few methods to repair and restore it to factory condition.

  • Scratches may be sanded out using 180 - 220 grit sandpaper.
  • Splits and cracks may be mended with regular wood glue and applying pressure to the board with a clamp. Remove excess glue and sand the joint with 180 - 220 grit sandpaper.
  • Gouges may be filled with wood putty and sanded with 180 - 220 grit sandpaper.
  • Dents may be removed from unfinished wood by placing a few drops of water into the dent and allowing it to set a few seconds. If it absorbs, add a few more drops. Cover it with a damp cloth, and then steam it out with an iron. Sever dent may require more than one treatment. Sand with 220 grit sandpaper. Different techniques are recommended for finished wood.

    • McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams BBBOnLine Participation AIC Millworks Accepted Forms Of Payment Buy Safe Participation Click To Verify