Raised Panel Wainscoting, MDF Kit 37"H x 95"L
Description
About MDF Raised Panel Wainscoting
Who can resist the eye-catching shadow lines created as light washes across the profile of delicately embellished frames? It's gorgeous! Apply one good coat of paint after installation and you're done!
Raised Panel Layout
To figure out what you need, measure the total length of the walls you plan to enhance and divide by 8; this will determine the quantity of kits required. That's it!
Wainscoting should be evenly spaced across each section of wall in your room. As the 37" MDF Raised Panel Wainscoting comes with over-sized panels to fit any job,the layout may be balanced along each wall by modifying the panel widths using any of the following methods:
- Apply full panels across each section from the center out. Miter symmetrical "partial" panels at each corner to fill the deficits; this maintains a seamless flow.
- Remove excess material from the center of each panel. Join the halves together so that all panels of a given section are symmetrical.
- Remove excess material from the end of each panel. Profile the ends using Freud router bit #99-519 so that all panels of a given section are symmetrical.
Wainscoting Kit Specifications
MDF Raised Panel Wainscoting is sold in a 95"L kit comprised of the following components:
- (1) bullnose wainscoting cap 2-1/2" x 1-3/8" x 95" (finger-jointed Poplar)
- (1) shoe moulding 1-3/8" x 3/8" x 95" (PVC)
- (1) top rail 4-1/8" x 5/8" x 95"
- (1) bottom rail 8-1/4" x 5/8" x 95"
- (5) stiles 4" x 24" x 1/2"
- (4) raised panels 24" x 24" x 1/2" ***NOT PRIMED***
Note that the wainscoting cap is manufactured out of finger-jointed Poplar for improved impact resistance, and the shoe moulding is milled out of PVC for water resistance. The stiles have a 1/4" tongue on the ends that fits within a groove along the rails. All wainscoting components less the raised panels come primed, ready to paint.
Installation Coverage
Each kit covers an area 37"H x 95"L (24.670 sq. ft.).
About MDF Raised Panel Wainscoting
Who can resist the eye-catching shadow lines created as light washes across the profile of delicately embellished frames? It's gorgeous! Apply one good coat of paint after installation and you're done!
Raised Panel Layout
To figure out what you need, measure the total length of the walls you plan to enhance and divide by 8; this will determine the quantity of kits required. That's it!
Wainscoting should be evenly spaced across each section of wall in your room. As the 37" MDF Raised Panel Wainscoting comes with over-sized panels to fit any job,the layout may be balanced along each wall by modifying the panel widths using any of the following methods:
- Apply full panels across each section from the center out. Miter symmetrical "partial" panels at each corner to fill the deficits; this maintains a seamless flow.
- Remove excess material from the center of each panel. Join the halves together so that all panels of a given section are symmetrical.
- Remove excess material from the end of each panel. Profile the ends using Freud router bit #99-519 so that all panels of a given section are symmetrical.
Wainscoting Kit Specifications
MDF Raised Panel Wainscoting is sold in a 95"L kit comprised of the following components:
- (1) bullnose wainscoting cap 2-1/2" x 1-3/8" x 95" (finger-jointed Poplar)
- (1) shoe moulding 1-3/8" x 3/8" x 95" (PVC)
- (1) top rail 4-1/8" x 5/8" x 95"
- (1) bottom rail 8-1/4" x 5/8" x 95"
- (5) stiles 4" x 24" x 1/2"
- (4) raised panels 24" x 24" x 1/2" ***NOT PRIMED***
Note that the wainscoting cap is manufactured out of finger-jointed Poplar for improved impact resistance, and the shoe moulding is milled out of PVC for water resistance. The stiles have a 1/4" tongue on the ends that fits within a groove along the rails. All wainscoting components less the raised panels come primed, ready to paint.
Installation Coverage
Each kit covers an area 37"H x 95"L (24.670 sq. ft.).
More Information
SKU | RPW-37 |
---|---|
Brand | Elite Trimworks |
Material Class | MDF |
Color Family | Primed |
Finish | Primed |
Suggested Application | Interior Millwork |
Height | 37 |
Length | 95 |
Material Thickness | 0.625 |
Style | Raised-Panel |
Frame Profile | Mission (Squared) |
Frame Construction | 5/8" MDF |
Panel Profile | Cove |
Panel Construction | 1/2" MDF |
Water Resistance | None |
Fire Rating | N/A |
Return Policy | This is a stock item and qualifies for our Satisfaction Guarantee. |
Unit of Measurement | Kit |
Leaves Warehouse In | 3-5 Business Days |
Weight | 66.000000 |
SKU | RPW-37 |
---|---|
Brand | Elite Trimworks |
Material Class | MDF |
Color Family | Primed |
Finish | Primed |
Suggested Application | Interior Millwork |
Height | 37 |
Length | 95 |
Material Thickness | 0.625 |
Style | Raised-Panel |
Frame Profile | Mission (Squared) |
Frame Construction | 5/8" MDF |
Panel Profile | Cove |
Panel Construction | 1/2" MDF |
Water Resistance | None |
Fire Rating | N/A |
Return Policy | This is a stock item and qualifies for our Satisfaction Guarantee. |
Unit of Measurement | Kit |
Leaves Warehouse In | 3-5 Business Days |
Weight | 66.000000 |
Login and Registration Form